- Product Description
All of our 'Classic Light Duty Commercial Finnish Sauna Cabins' are manufactured in our UK factory using traditional Grade A Scandinavian kiln dried spruce from managed and replanted forests, timber selection is crucial to the correct performance of the sauna cabin. Spruce, which has both low heat absorption and low resin content is ideal.
Our products are tested in the UK by the independent testing house 'Nemko' to meet British and European Standard.
With over 40 years experience in Traditional Sauna Cabin manufacturing, we pride ourselves on quality at exceptional prices.
C4040 Light duty commercial Finnish sauna cabin 2500 x 2600 x 2000mm is supplied with a 12kw Floor standing sauna heater with OCSB digital remote controls.
Peridotite rocks, these rocks are very dense and contain an extremely low number of air pockets, an igneous rock that is rich in iron and magnesium which posess a relatively high heat capacity making them ideal for use in saunas.
Reinforced 5 slat benches with supports, an extra duty base which lifts the walls panels off the floor, back rests, slatted floor mat (all supplied flat packed), a modern full height safety glass door with polished chrome & Ash wood handle and polished chrome hinges, optional upgrade to our larger 940mm disabled access door, heater guard, towel and fragrance rack, four 125ml bottles of Saunaroma (Lavender, Eucalyptus, Rosemary, Orange) headrests, traditional water bucket with liner and sculpted ladle, sand timer, thermometer, and lighting. Assembly instructions, caution plate, operation and maintenance manual, water resistant bathing rules card and all fitting and fixings.
All panels are fully insulated with rockwool fibre, and are clad on both the exterior and interior faces allowing the cabin to be assembled free standing in almost any location without the need for brickwork, plastering or fixing to walls .
The door mounted in its frame is the same size as a panel and entirely symmetrical allowing its position on the to be readily interchanged, though the door must for safety reasons be opened outward it can be hinged either left or right. In many cabins it is possible to have more than one bench layout, we are happy to advise on individual circumstances.
- Celebration or Deluxe
Our Celebration saunas are our most popular and cost effective specification, they feature kiln dried Finnish Spruce timber for the benches, backrests, floor mat and heater guard, the lighting provided is a sauna lamp and wooden shade.
For those seeking extra style and comfort, our Deluxe specification offers an upgrade to Abachi timber for the benches, backrests, floor may and heater guard, the backrest has an additional slat and is ergonomically curved for user comfort. Abachi timber is knot free hardwood with an attractive appearance, it is selected for use in saunas due to its low thermal conductivity. The lighting provided is low voltage spot lights.
Dimensions (LxWxH) 2500 x 2600 x 2000mm Controller External Digital Remote Controls Electrical Supply 400 Volt 3 Phase Model C4040 Heater Type Wall hung Flat Packed Yes Materials the Sauna can be erected on Vinyl, Ceramic, Concrete Bench Width 430mm Number of Low Benches 2 Number of High Benches 2 Number of Bathers 10 Heater Size 12kW Hard Wiring Required Yes Air Gap Requirements 25mm
- Which heater to choose
Floor Standing Heater
Oceanic Floor Standing heater with OCS-B controls is available in 3 sizes: 9kw, 12kw and 15kw, low votage control panel and high voltage control box. Must be wired three phase.
- Built for heavy duty use
- Stainless Steel shell
- Large 25kg rock basket
- Long life incaloy elements
- Simple to replace elements
- On view inside the sauna
Behind Bench Heater
The Oceanic behind bench heater with OCS-B controls is a wall mounted unit that is located behind a false wall at the rear of the cabin. There are many advantages of this model of heater
- Built for heavy duty use
- Protected heating elements
- Rocks do not come into contact with heating elements
- Drip and eveporation trays control the water dosing. This prevents water being splashed directly onto the elements which is a common cause of element failure in standard sauna heaters.
- A water dish and hose are fitted with the behind bench heater, users pour water into this dish mounted behind the false wall and the water is distributed evenly across the rocks.
- Safer to use - prevents any accidental injuries from users being able to come into contact with the hot surfaces of the heater
- More energy efficient
- Sizing and Layouts
5 Slat Bench Floor Plan
6 Slat Bench Floor Plan
- Technical Information
- Sauna heaters do not operate from a 3 pin plug, they require hard wiring via an isolator switch using high temperature silicon rubber cable to BSEN 6141 (not included). Purchase 3 Meters as an optional extra or See our sauna accessories page for Silicone Rubber Cable in order to order different lengths.
- There is a wiring panel which has an internal gully which allows the wire to be hidden inside the panel if required.
- For heaters with Remote OCSB controls, the control box will supply the heater, keypad, lights and temperature sensor. The control box is usually positioned on the roof of the cabin.
- Product Features
An extra heavy duty floor standing Oceanic sauna heater in stainless steel. Built for day long operation and equipped with Long life incalloy elements, supplied complete with a quantity of sauna heater rocks, user instructions and 12 months guarantee.
Floor Standing OCSB Sauna Heater
Safety Glass Door
A full height clear glass door constructed from tempered safety glass, featuring modern polished chrome hinges and matching Ash and polished chrome handle
Extra Duty Base
We have increased the size of the base of the sauna making it more robust and lifting the panels off the ground providing a little more cabin height, lifting the wall panels off the ground also protects them from any water laying on the ground prolonging the life of the sauna.
A double wall frame beneath the bench strengthens and reinforces, accommodating for the toll of additional bathers.
Fully Insulated Panels
All wall and ceiling panels are fully insulated with DIN4102 rated Earthwool fibre insulation, ensuring the heat is contained within the cabin, speeding up heat up times and reducing energy waste.
- Installation & Size Adjustments
- A level, washable floor, preferably vinyl, stone, ceramic or concrete
- 25mm air gap all around the cabin to allow air to circulate
- A suitable power supply - an isolated 230V single phase or 400V three phase supply installed by a qualified electrician.
- In restricted areas is it possible to assemble the sauna cabin from the inside
- The door of the cabin can be hinged left or right but must open outward
- A qualified electrician must be used for the installation of the sauna heater.
- Sauna cabins do not require a drain, nor is it recommened that you add one to assist when cleaning, if the trap of the drain dries out the smell from the drainage will enter the sauna.
For full details on the sauna cabin and sauna heater installation the manuals can be downloaded from the "Downloads" tab or visit our Downloads Page for a full list of all manuals.
Modifications can be made to reduce the size of the sauna width and depth, the height of the sauna must not be altered. Full details on how to make modifications can be found in our "Sauna Assembly Manual" which is available for download from the "downloads" tab above.Size adjustments can also be made in our factory, for full details on bespoke sizing please call our sales team.
Please note: the heater supplied with each model is the correct for the power for the size of cabin, reducing the size of the cabin may mean that the heater will be too powerful, for advice on which size heater you require for your cabin please call our sales team.
- Optional Extras
Extra deep 6 Slat Benches
The extra deep 6 slat benches are available for all of our light duty commercial cabins. Manufactured in our UK factory using Grade A Scandinavian kiln dried spruce from managed and replanted forests, timber selection is crucial to the correct performance of the sauna cabin. Spruce, which has both low heat absorption and low resin content is ideal.
Please note the floor plan for 6 slat bench cabins are different to 5 slat bench cabins. The external dimensions are the same.
Enhance your sauna experience with our new Sauna Herb Bowl. Slice a lemon or lime, crush a handful of your favorite herbs and toss them into this bowl with a little water, hang it directly over the sauna stove using the chain and hook provided - the extra humidity will combine with the delightful natural fragrances adding another dimension to your sauna experience.
Can also be used with Himalayan salts.
Stainless steel bowl with chain and fittings.
120°C High temperature waterproof IP65 sauna speakers with Bluetooth
Two water proof IP65 rated 120°C 10 cm (4") speakers with plastic basket and grill. Balanced, high cone frequency response efficiency and good high to mid-range reproduction. Suitable for use in swimming pools, saunas, steam rooms. Bluetooth mini stereo audio for connecting to Bluetooth enabled devices.
We offer a range of fully glazed and half glazed panels. Glass panels can allow you to take advantage of a view from your room, or just let some natural light into the sauna creating a feeling of space. For advice on glazing options please call our sales team.
Seamless colour transition between all colours in the spectrum. Remote control included with variable brightness and ability to change between colours. Suitable for infra red and traditional saunas.
[Important: must not be installed above 1500mm within a rock heater sauna cabin]
- Delivery & Warranty
Curbside delivery to Mainland England or Wales £94 for other areas please use our delivery calculator at the checkout or call our sales team for a quotation.
Sauna cabins are delivered on a palletised shipping service to the curbside of your property. We recommend two people are available to offload the pallet which usually takes around 20 minutes. Gloves and safety goggle are recommended especially when handling glass.
Once your cabin has been manufactured (usually 2-3 weeks) it will be palletised and despatched, you will receive a call from the carrier 2 days in advance of delivery to arrange a suitable delivery date.
If your sauna is not immediately required please let us know as soon as possible, all sauna cabins are made to order.
For full details please refer to our Shipping Policy.
All Oceanic sauna cabins have a 12 month warranty.
The warranty excludes heating elements as these are consumable items.
Our after sales service is at your disposal Monday - Thursday 9am - 5pm, & Friday 9am - 3pm, all parts are in stock and will be available during and beyond the warrant period.
- Download Files & Manuals